Parameters of WDC WD3200AAJB-00J3A0 with Firmware 01.03E01
General information | |
---|---|
Trademark | Western digital |
Model | WDC WD3200AAJB-00J3A0 |
Capacity | 298 GB |
Interface | PATA |
Maximum Ultra DMA mode | 6 |
Firmware | 01.03E01 |
Firmware upgrade | supported |
ATA version | 8 (ACS) |
Advanced Format | not supported |
Units tested | 60 |
Times tested | 158 |
Performance | |
Maximum interface speed | 133 MB/s |
Maximum buffered read speed | 87 MB/s |
Maximum read speed | 86 MB/s |
Minimum average access time | 15.20 msec |
Cache buffer | 8 MB |
Volatile write cache | supported |
Read look-ahead | supported |
Command Queuing Optimization (TCQ) | not supported |
Advanced Power Management (APM) | not supported |
Acoustic Management (AAM) | supported |
Reliability | |
Count of sensors | 17 |
Free-fall Control | not supported |
SMART Command Transport (SCT) | supported |
Duration of full self test | 79 minutes |
Critical maximum temperature | 85°C (185°F) |
Recommended maximum temperature | 60°C (140°F) |
Maximum temperature | 68°C (154°F) |
Average maximum temperature | 43°C (109°F) |
Security | |
Drive access restriction | supported |
Enhanced security erase | not supported |
Data destruction time | 66 minutes |
Instant data destruction | not supported |
Host protected area (HPA) | supported |
Host protected area password | supported |